Air!Scout:Flarm Local Receiver

From Beast Wiki
Revision as of 05:42, 30 April 2019 by Dl4mea (talk | contribs) (Created page with "====Local Flarm Receiver (Optional)==== Bild: AirScout Rückseite mit Flarm-Buchse und Kabel zur Active Diapason 868MHz, ähnlich <https://www.qsl.net/dl4mea/fpgaadsb/modesbe...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Local Flarm Receiver (Optional)

Bild: AirScout Rückseite mit Flarm-Buchse und Kabel zur Active Diapason 868MHz, ähnlich <https://www.qsl.net/dl4mea/fpgaadsb/modesbeast-2ch-omni-yagi.gif>

When equipped with a RTL-SDR stick, Air!Scout comes with preinstalled software from the Open Glider Network (see http://wiki.glidernet.org/start). Air!Scout is able to include these results into its own database and show Flarm aircraft together with ADS-B and MLAT data in a common map. However, in order to work correctly, some steps have to be done:

  1. Check that GPS is stable (Status -> GPS)
  2. Create the configuration file for OGN receiver (Settings -> External Sources Settings -> <tbd>)
  3. Watch the incoming messages from OGN receiver (Status -> Local Flarm Receiver Connection)

In case of troubles, disable and re-enable the OGN receiver part within Settings -> External Sources Settings -> Local Flarm Receiver Data Reception -> Save