Radarcape:Firmware Versions

From Beast Wiki
Revision as of 08:49, 4 December 2015 by imported>Dl4mea (→‎Release_151121.19.20.30)
Jump to navigation Jump to search


Software Packages

Starting with November 2013, the release strategy will be Linux installer packages, which include the Linux software as well as the FPGA firmware.

Known issues of latest Release

  • Web page and KML refresh times do not apply when beeing changed while the display is running: You need to reload the page in order to apply changes.
  • Changing the FR24 feeder mode from ADS-B only / MLAT mode requires switching off in between.
  • After the installation of a new version (Angstrom opk package) ssh is inaccessible until a reboot.
    (Note: If someone knows why, let me know, please)

Release_151204.08.00.30

Bugfixes

  • The login to admin pages is possible again


Known Bugs

  • Platform independent:
    • Logout screen is not properly displayed.
  • Angstrom:
    • Angstrom devices may be inaccessible by SSH after a package installation and require a reboot.

Direct links to the packages

For example, the Debian command line which I use to install the version on shell level:

wget http://jetvision.de/resources/radarcaped-151204.08.00.30.deb; dpkg -i radarcaped-151204.08.00.30.deb; apt-get install -y -f; rm *.deb;exit

Debian radarcaped-151204.08.00.30.deb
Angstrom radarcaped-151204.08.00.30.opk

Credits

Thanks to Nuno, Sascha and Andy for their contributions and all others having contributed to this version.

Release_150620.14.30

Changes:

  • aircraftlist.json: removed "hed" field, it now is called "trk". Previous field "trk" is now split into "tsa" and "tsm". Also inserted new field "uti" for unix time, allows recovering the date, but does not include nanosecond information.

see also Radarcape:Software_Features#Aircraft_List_JSON_Service

Release_150607.17.30

Bugfixes:

Release_150307.07.00

On Saturday, 7th March 2015, Solar Impulse will start in Abu Dhabi to achieve the First Round-The-World Solar Flight. The flight shall demonstrate that new technologies and alternative energy sources can achive what some consider impossible. The project was initiated by the two Swiss explorers Bertrand Piccard and André Borschberg.

For this event, we added a special Solar Impulse 2 aircraft symbol to the Radarcape 2D map. So, Radarcape users are enabled to see this exceptional aircraft on their maps. The new Solar Impulse symbol is available since SW release (20150307.07.00).

If you see Solar Impulse 2 on your Radarcape, we would be pleased when you could send us a screenshot with Solar Impulse on the 2D map. The hunt for the first screenshot starts now!

Solar Impulse 2 route: Abu Dhabi (UAE), Muscat (Oman), Ahmedabad (India), Varanasi (India), Mandalay (Myanmar), Chongqing (China), Nanjing (China), Hawaii (USA), Phoenix (USA), Central USA, New York (USA), Southern Europe or Northern Africa, Abu Dhabi (UAE). (Exact route depends on weather conditions)

We wish good luck to the SI2 team and keep our fingers crossed that your journey will be successful.

Further information on SI2: www.solarimpulse.com

New Features:

  • Several improvements to 2D map web page
  • New symbol for Solar Impulse 2 on 2D map

Bugfixes:

  • Selected range unit (km/NM) is now used on 2D map Web page
  • Planeplotter feeder disable issue fixed (it now can be disabled)

Installation:

Users with the previous release installed should see this version listed in their maintenance menu.

Manual installation command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-150307.07.00.opk

Note: For updates, your Radarcape must have an internet connection. Manual update requires copying the update package to the Radarcape by any means and issuing the opkg install command for the location of the package.

Release_150219.18.30

New Features:

  • There are many new aircraft symbols in the 2D map

Courtesy of Nic Storey, we now are able to display many different symbols for aircraft as soon as the type is known.
www.virtualsky.co.uk
www.nicstorey.co.uk/planeplotter
planeplotterforum.co.uk
planebase.biz
Thank you very much for your great support, Nic!

  • Aircraft tracks in 2D map: Simply click on an aircraft in order to see the track.
  • New FPGA showing GPS tracking status:

- continuous red: GPS antenna short or open
- continuous yellow: Not tracking any satellite
- flashing green but yellow background: Operating, but tracking less than 3 satellites (is ok, but not recommended)
- flashing green with black background: Normal operating mode
- flashing yellow with black background: If rarely happens: normal operating mode with minor timestamp deviations

  • New FR24 feeder

Changes:

  • The Mode-S LED for correct operation is now flashing green instead of red. This will prepare for later red and yellow indication for other kind of notifications.

Known Issues:

  • 2D map tracks do not disappear sometimes if the aircraft is no longer visible. Solution: simply select another aircraft

Release_141125.18.15

New Features:

  • Web user interface got a modern look and feel
  • The aircraft icons on the 2D map are no longer simple arrows but look now like real aircrafts
  • New aircraftlist.json which contains the same data as the Web aircraft list

The new Web interface was tested with the following browsers:
- Firefox 33 or later (Linux, Windows)
- Iceweasel 31 or later (Linux)
- Google Chrome 39 or later (Linux, Windows)
- Internet Explorer 11 or later (Windows)

Other browsers may work but have not been tested.

Radarcape Web Configuration Page

Fixes:

  • no data sent via delta DB file

Release_140922.19.03

New Features:

  • In addition to Flightradar24 and Planeplotter, the Radarcape can now easily feed the current aircraft list to Planefinder and FlightAware servers. See the configuration menu how to register at their servers as a feeder. You can select the feeding interval separately for each in steps by 15, 30, 60, 120 and 300 seconds. There is a random value added in order to spread the feeding events a little over time.

Changes:

  • The main menu and the configuration menu became redesigned for a better readability.
  • Feeder status shows some more information, e.g. the true FPGA settings and the server's respose.

Fixes:

  • The feeding of data is now coupled to the trust level of an entry. It must be at least 2 in order to upload data to a server. This should prevent ghost aircraft from beeing transmitted. Regular aircraft easily exceed this number within a very short time, so there is no real delay in announcing them to others. This feature should allow FEC beeing switched on in some more situations.
  • Omit time should now be used in all maps and tables correctly.
  • In the 2D map some aircraft appeared at 0°/0° coordinates after some time. That is fixed now.

Release_140412.08.49

New Features:

  • none

I am currently working for the Peer-to-Peer MLAT, which is basically working with very precise results, however the communication between the Radarcapes has proven to be unstable and so needs a redesign.

Changes:

  • New FR24 feeder
  • Some performance increase with Port 30003 data output
  • The Flightroutes link parser was changed to handle the new structure of the links

Release_140209.18.32

New Features:

  • Decodes flight identification from DF20/DF21 frames (thanks, Bev)
  • Decodes speed/heading from DF-17 subtype 3+4
  • Automatic control of FR24 feeder setting change. No longer needs to manually sequence a setting change.

  • Prepeared for next release to be installed with web GUI command. With this, it does not need to go into Linux when you want to install a software update

  • The 3D map opens correctly with Windows 7

Changes:

  • New FR24 MLAT capable feeder release 20140127-1444
  • Some cosmetic changes
  • Planeplotter sharing feeder in some cases contained false flight names

Install command:

opkg update
opkg install -V http://www.modesbeast.com/resources/radarcaped-140209.18.32.opk

Release_140124.08.32c

New Features:

  • Supports type information and routes information from common databases. This is displayed in aircraft list and 3D output currrently, it will become displayed in 2D and JSON output with next release. Origin and Destination are split, so you can sort for both in the aircraft list.
  • There is a new Maintenance web page in the Radarcape where the links to the zipped archives can be pasted into, after pressing Update button the database is fetched from the server, unzipped and becomes installed. The whole update procedure is displayed in the web browser.

Planeplotter Feeder Status

Note: Flightroute emails mostly contain a short link to the archive. Following this link is not included here, you always must copy the final ZIP archive link. This link also invalidates after a while, so in case of problems, referesh the page displaying it and use the new link.
It does not matter if you prefer the 3 letter or 4 letter database, Radarcape will handle both.

Changes:

  • New FR24 MLAT feeder: This feeder connects to raw data port, no longer to Port 30003. Its options for aircraft sharing and MLAT data sharing can be controlled through Radarcape's configuration dialogue. Note that the CPU load is somewhat more than the old feeder.
  • The former field 'Ident' became renamed to 'Flight'

Install command:

opkg update
opkg install -V http://www.modesbeast.com/resources/radarcaped-140124.08.32c.opk

Release_140106.19.14

New Features:

  • Planeplotter sharing upload for positionless aircraft can be disabled now

Changes:

  • uploading to Planeplotter uses upper case 6 digit ICAO id

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-140106.19.14.opk

Release_140106.13.29 - Planeplotter Feeder, Ground Decoding

New Features:

  • Planeplotter aircraft sharing added

This is the first release which publishes the current known aircraft to the Planeplotter network. Uploading can be enabled and disabled. You need to get a sharing authorisation, whichis explained in the configuration dialogue. There is also a status page and a link provided to the Planeplotter server which shows your past uploads. Uploading is currently done once every minute plus a random 0...14 sec. (The uploading methode was prepared for R-Pi, Bev needs to rename the service now.)

MLAT support will be added as soon as possible.

Planeplotter Feeder Status Upload Statistics on the Planeplotter Server

  • Ground decoding

Ground data is decoded. It is output in all services.

3D Display of Ground Traffic (yellow tracks)

Changes:

  • The Flightradar24 Feeder can now be started based on the internal deltaDB methode or Port 30003 data, as some users felt that if based on Port 30003 the acceptance rate at FR24 is higher than based on deltaDB. Please note that Port 30003 is a very inefficient protocol and consumes more CPU resources than deltaDB.
  • The feeders now start only if the GPS time is available. Timestamps on web status pages contain an (X) if unknown time source, (C) if the CPU time is used and (G) if GPS time is present.
  • Port 30003 output data contains GPS timestamp if available.

Install command:

# original version overwritten by 19.14
opkg install -V http://www.modesbeast.com/resources/radarcaped-140106.19.14.opk

Release 131225.18.56

New Features:

  • Remote control of FPGA configuration ("DIP switches") can be enabled and disabled in configuration

Solves:

  • Timestamp problem: All timestamps are based on the GPS time. If not available CPU time is used

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131225.18.56.opk

Release 131206.22.40

New Features:

  • 2D map automatically centers on your GPS position and zooms according to your current largest distance.

Solves:

  • Internet Explorer may not be display the web pages at all, Mozilla Firefox seems to be tolerant. Radarcape currently does not send the correct HTML header.

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131206.22.40.opk

Release 131202.20.55

New Features:

Solves:

  • KML starter did not access KML output -> Google Earth 3D view did not work

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131202.20.55.opk

Release 131128.21.18: Introduction of 2D Maps

New Features:

  • 2D map display on web browser

Solves:

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131128.21.18.opk

Release 131127.05.01: Solves P30003 message type problem

New Features:

  • none

Solves:

  • The port 30003 messages MSG,2 and MSG,3 seem to be swapped. ==> actually all Port 30003 messsages were one count too low.

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131127.05.01.opk

Release 131126.19.46: Configuration Page Issues Solved

New Features:

  • none

Solves:

  • The configuration page when beeing saved does not confirm change but show an empty page or a failure message. However the changes appear to be taken. It only happens on a few installations. Investigation is in progress.
  • There was a delay when connecting to a TCP port, which is now avoided.
  • HTML 'Back' link moved to the top of all pages
  • Timestamp behaviour in P30003: Is now truely message generation and message capture time.
  • uses GCC 4.3.3 and Boost 1.53.0

Install command:

opkg install -V http://www.modesbeast.com/resources/radarcaped-131126.19.46.opk
Installation output

FPGA Firmware

Firmware update on the Radarcape is absolutely simple: Just mount the Radarcape as a drive into your Windows, then replace the existing meaADSB.rbf file with the one downloaded from this web page. You may save the existing one, but the history also exists here for download (including the version name in the file name).

The GPS timestamp

The GPS timestamp is completely handled in the FPGA (hardware) and does not require any interactions on the Linux side. This is essential to meet the required accuracy. The local clock in the FPGA (64MHz or 96MHz) is stretched or compressed to meet 1e9 counts in between two pulses by a linear algorithm, in order to avoid bigger jumps in the timestamp. Rollover from 999999999 to 0 occurs synchronously to the 1PPS leading edge. In parallel, the Second-of-Day information is read from the TSIP serial data stream and also aligned to the 1PPS pulse. Both parts are then mapped into the 48bits that are available for the timestamp and transmitted with each Mode-S or Mode-A/C message.

  • SecondsOfDay are using the upper 18 bits of the timestamp
  • Nanoseconds are using the lower 30 bits. The value there directly converts into a 1ns based value and does not need to be converted by sample rate
nanosec = (msg[2] & 0x3f) << 24
         | msg[3]         << 16
         | msg[4]         << 8
         | msg[5];

daysec =  msg[0] << 10
        | msg[1] << 2
        | msg[2] >> 6;

if (daysec_tm1!=daysec)
{
    daysec_tm1 =  daysec;
    hh         = (daysec/3600) % 24;
    mm         = (daysec/60)   % 60;
    ss         =  daysec       % 60;
}

Example:

Timestamp of 1019UTC: 0x244bbb9ac9f0

lower 30 bits are 0x3b9ac9f0 => Nanosecond = 999999984 * 1e-9
upper 18 bits are 0x912e => daysec = 37166
hour = 37166/3600 = 10
minute = 37166 / 60 modulo 60 = 19
second = 37166 modulo 60 = 26

So time is 10:19:26.999999984 after UTC midnight

The legacy 48bit and 12MHz based timestamp however is not synchronized to 12MHz at all, so it still works as it has been since ever.

Linux and FPGA firmware package ppsjump-021 (23. Aug. 2013)

Corrections

  • For enhanced stability, this version is based on Linux 3.8.
  • The GPS tool is now included into the radarcape deamon. It also provides a GPS status through the web server, accessing gps.html on the integrated webserver
  • The TCP ports for data streaming connect on each try, not each second.

Installation

For this version, it is essential that you update your SD card completly from scratch. Download the naked Linux 3.8 image (73MB) and make a SD card as described in Radarcape Linux Install/Configure. Please mind the two screenshots there in order to see how about the update procedure works like. (As some users had problems unpacking the XZ, there is a Linux 3.8 image ZIP Version (130MB) on the server, too)

When inserted and rebooted, either login through the serial port (Mini-USB on the back side) or via SSH/network (then your destination temporarily is “beaglebone”). Enter these commands, and don't forget to enter your known Radarcape ID when beeing asked from the skript:

cd
rm install38.sh
wget http://www.modesbeast.com/resources/install38.sh
sh ./install38.sh
reboot -f

FPGA Firmware meaADSB_ep3_143_ppsjump-020

Corrections

The GPS timestamp locked on multiplies of 32768 in situations when the 1PPS signal was disturbed by external matters.

superseeded by ppsjump-021


FPGA Firmware meaADSB_ep3_141_gpsmlat-3

Corrections

SecondOfDay (the upper 18 bits of the timestamp in GPS mode) and Nanoseconds (the lower 30 bits) are now synchronized.

Note that in order to overcome above problem with negative timestamps, the GPS read: absolute timestamp of Mode-S and Mode-A/C frames is taken at the end of the frame, at least until further notice. This does not make any difference for multilateration, as long as this feature is unique provided by the Radarcape.

Firmware meaADSB_ep3_141_gpsmlat-3

md5sum meaadsb_ep3_141_gpsmlat-3.rbf
86d6cdb069868e4f57d47dfc3441593c  meaadsb_ep3_141_gpsmlat-3.rbf
md5sum meaadsb_ep3_141_gpsmlat-3.zip
5bcae05ea429b4ef943b303314e22b82  meaadsb_ep3_141_gpsmlat-3.zip


FPGA Firmware meaADSB_ep3_141_gpsmlat-2

Firmware meaADSB_ep3_141_gpsmlat-2 has a working GPS timestamp function. Therefore, DIP#5 switch selects either the standard 12MHz timestamp (when off) or the GPS timestamp (when on).

md5sum meaADSB_ep3_141_gpsmlat-2.rbf
dc7a6278a668b1bdb81fd67e7a1891a6  meaADSB_ep3_141_gpsmlat-2.rbf
md5sum meaADSB_ep3_141_gpsmlat-2.zip
ba54740894406cb38e8dd95d0fc3e3e8  meaADSB_ep3_141_gpsmlat-2.zip
Radarcape DIP Switch Settings
Radarcape DIP Switch DIP#1 DIP#2 DIP#3 DIP#4 DIP#5 DIP#6 DIP#7 DIP#8
Equivalent Beast DIP
with resp. to PP setting
DIP#3 DIP#4 DIP#5 DIP#6 DIP#7 DIP#8 DIP#9 DIP#10
When ON Binary format only DF-11
and DF-17
enable MLAT
in AVR format
CRC check
disabled
GPS based
timestamp
RTS hardware
handshake
1 Bit FEC
disabled
Mode-A/C decoding
enabled
When OFF AVR format all usable DF no MLAT in
AVR format
CRC check
enabled
standard 12MHz
timestamp
hardware hand-
shake disabled
1 Bit FEC
enabled
Mode-A/C decoding
disabled
Command
Character
c/C d/D e/E f/F g/G h/H i/I j/J
not used in binary format

An upper case character is equal to a DIP that is in ON position, a lower case character equal to DIP in open position

The green LED next to the SMA connector is used as GPS indicator:

  1. Short on, long off: Just 1PPS is present, but no time of day information
  2. On and off time equal: 1PPS present, Time of day present, but there is a synchronisation offset
  3. Long on, short off: 1PPS present, Time of day present, Internal time is synchronized to GPS

It is not a problem if the clock sometimes falls back from (3) to (2), because the sensitivity of synchronisation check is +/-1 tick.

The center red LED flashes as an indication of operating about twice per second. It should flash very fast in case that hardware handshake is active.

The GPS based timestamp still uses the standard 48 bits as known from the 12MHz timestamp, but in different way:

  • the lower 30 bits are the time since the last 1PPS pulse, in 1ns steps, currently 15ns resolution
  • the upper 18 bits are the Seconds-Of-Day, starting with zero at midnight UTC

Known Issues (meaADSB_ep3_141_gpsmlat-2)

  1. Within the GPS timestamp, the Second-Of-Day part advances in the mid of the 0-999999999ns phase ⇒ next version
  2. Sometimes the Second-Of-Day part does not increment at the rollover of the nanosecond part ⇒ next version
  3. The absolute value of the GPS timestamp of 14 bytes long Mode-S frames is offset, however since all units do have that error, it is not a big problem for multilateration ⇒ wait for release
  4. Negative delta time offsets between consequent frames ⇒ not an issue (see below)

Negative delta time between consequent frames

If you look at the block diagram of the Mode-S Beast, recognize that there are several frame decoders working in parallel, plus the Mode-A/C decoder, which is not yet mentioned in the picture. They all work independently, their output - a ready frame - is written into a FIFO in order to buffer it for RS232 transmission.

It now may happen that during the reception of a Mode-S frame, an overlapping Mode-AC frame becomes decoded in parallel and is written into the FIFO, prior to the end of the Mode-S frame. Since the timestamps are taken at the start of frame, in that situation, the Mode-AC frame with a later timestamp is written to the FIFO before the Mode-S frame finishes. Consequentally on the output, the later timestamp of the Mode-S frame appears ahead of the Mode-S frame's.

It is easy to understand with the Mode-AC as a cause, but the same happens if one of the noise decoders or the overlapping Mode-S frame decoder outputs a frame while the other is still working.

Sorting that in the FPGA would cost too many ressources, so users of the timestamps anyway need a matching algorithm among different units, so that algorithm should be aware about this situation.

If you think about swapping them around, note that it may not happen with two frames but several, e.g. in the situation that two Mode-A/C frames do overlap a 14 byte Mode-S frame.