Radarcape:Installation Guide

From Beast Wiki
Revision as of 17:06, 21 February 2015 by imported>Bianca
Jump to navigation Jump to search

Connect Radarcape Hardware

Radarcape backside explained


Plug the following connectors into the Radarcape

  1. Mode-S antenna
  2. GPS antenna
  3. Ethernet/LAN cable
  4. Power cable

Connect the power supply with the electrical outlet.

Antenna placement

Mode-S Antenna

The Mode-S antenna should be placed as free and as high as possible.

GPS Antenna

The GPS antenna should be placed to a point with at least half of the sky in free sight, for example a window sill.

Some users reported running the GPS antenna indoors. This is not guaranteed to work.

Software Configuration

The Radarcape as a network device - the hostname or DNS name

Network devices can be accessed in two ways:

  • via IP address (e.g., 192.168.1.157)
  • via hostname (e.g., radarcape)

The IP address is provided to your Radarcape either during startup via the Dynamic Host Configuration Protocol (DHCP) service or a fixed address can be set on the device. Automatic configuration via DHCP is the default configuration of the Radarcape. Usually, your internet router provides the DHCP service in your network and assignes an IP address to your device. Fixed addresses can be assigned configured via the Linux command line. For the configuration of a fixed IP address, please refer to one of the Linux manuals you can find in the Internet.

The hostname is a given name that is stored internally in your device (it is located in the file /etc/hostname). If there is no label on the back side of your Radarcape, the hostname is radarcape or rc<nn> (with <nn> being a number).

Most internet routers provide the DHCP and Domain Name Service (DNS) for local network devices. The DHCP service automatically asignes IP adresses in local networks. DNS is used by clients (.g., your browser) to resolve host names to IP addresses. During the boot sequence, the radarcape requests an IP address from this DHCP service. It also reports it's hostname to the DHCP service on the router. At this stage, most routers automatically update their DNS database with the hostname and the IP address of your radarcape. This is strongly required if you want to access your Radarcape via the hostname.

If you are not able to access your Radarcape via the hostname, usually the DNS service has not been updated. Some internet routers do not support this feature. In this case you can access the Radarcape via it's IP address. To obtain the IP address, open the Web interface of your internet router. Usually, it will contain a page that lists all IP addresses that were assigned by the DHCP service.

This is how you identify your device in the network. Take care on an probable issue with Windows, described here Radarcape:ConnectivityFailures

We will develop a Radarcape finder pretty soon, so you don't have do obtain it in this manual ways.

DHCP listing of a DD-WRT router showing hostnames RC70 and RC71 as 192.168.1.180 and 192.168.1.133
DHCP listing of a Fritzbox showing hostname RC23 as 192.168.178.36

Software Configuration

Scope: Configuration of Radarcape from it's internal menue

Advanced Configuration

Scope: Maintenance, Security

Advanced Configuration Interfaces

There are two ways how to connect to the Linux system:

  • SSH through the network
  • Back side Mini USB connector

Set Root Password

In the default configuration, no password is set for the root user (administrator) on the Radarcape. We strongly advise you to set a password for security reasons in case that you are not sure if externals can access your network segment. Please remember your password as there is currently no other password recovery method than creating a new SD card image for your Radarcape.

First you must login to your Radarcape via SSH.

  • Windows users can use the free SSH client Putty.
  • Linux/Unix users may use SSH from the command line.

Please replace rc11.home with the DNS name or IP address of your personal Radarcape.

An initial root password has not been set. Therefore, you can login with user root and no password.

After you have logged in on your Radarcape, you can set a new root password with the following command:

passwd
Radarcape Password Change



The message passwd: password updated successfully will indicate that the new password has been set.



Radarcape:Contents