Air!Scout:Flarm Local Receiver: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
====Local Flarm Receiver (Optional)====
====Local Flarm Receiver (Optional)====


Bild: AirScout Rückseite mit Flarm-Buchse und Kabel zur Active Diapason 868MHz, ähnlich <https://www.qsl.net/dl4mea/fpgaadsb/modesbeast-2ch-omni-yagi.gif>
Bild: AirScout Rückseite mit FLARM-Buchse und Kabel zur Active Diapason 868MHz, ähnlich <https://www.qsl.net/dl4mea/fpgaadsb/modesbeast-2ch-omni-yagi.gif>


Air!Scout can optionally be equipped with a RTL-SDR stick, and by that serve some SDR applications. It comes with preinstalled software from the Open Glider Network (see http://wiki.glidernet.org/start). Air!Scout is able to include the results of this receiver into its own database and show Flarm aircraft together with ADS-B and MLAT data in a common map. However, in order to work correctly, some steps have to be done after installation of the hardware:
Air!Scout can optionally be equipped with a RTL-SDR stick, and by that serve some SDR applications. It comes with preinstalled software from the Open Glider Network (see http://wiki.glidernet.org/start). Air!Scout is able to include the results of this receiver into its own database and show FLARM aircraft together with ADS-B and MLAT data in a common map. However, in order to work correctly, some steps have to be done after installation of the hardware:


* Check that GPS is stable (Status -> GPS)
* Check that GPS is stable (Status -> GPS)
Line 11: Line 11:
** Enable reception of local results
** Enable reception of local results


[[File:OGN_Config.png|450px|Air!Scout front panel]]
[[File:OGN_Config.png|450px|Create Config File]]


* Watch the incoming messages from OGN receiver (Status -> Local Flarm Receiver Connection)
* Watch the incoming messages from OGN receiver (Status -> Local FLARM Receiver Connection)


Bild: Incoming Flarm results
[[File:OGN_Status.png|450px|Incoming FLARM results]]


In case of troubles, disable and re-enable the OGN receiver part within Settings -> External Sources Settings -> Local Flarm Receiver Data Reception -> Save
In case of troubles, disable and re-enable the OGN receiver part within Settings -> External Sources Settings -> Local Flarm Receiver Data Reception -> Save

Revision as of 18:15, 12 May 2019

Local Flarm Receiver (Optional)

Bild: AirScout Rückseite mit FLARM-Buchse und Kabel zur Active Diapason 868MHz, ähnlich <https://www.qsl.net/dl4mea/fpgaadsb/modesbeast-2ch-omni-yagi.gif>

Air!Scout can optionally be equipped with a RTL-SDR stick, and by that serve some SDR applications. It comes with preinstalled software from the Open Glider Network (see http://wiki.glidernet.org/start). Air!Scout is able to include the results of this receiver into its own database and show FLARM aircraft together with ADS-B and MLAT data in a common map. However, in order to work correctly, some steps have to be done after installation of the hardware:

  • Check that GPS is stable (Status -> GPS)
  • Create the configuration file for OGN receiver (Settings -> External Sources Settings -> Create Configuration for Integrated Open Glider Net Receiver)
    • Select a location name according to the naming rules
    • Enable bias current if you are using Jetvision's Active Diapason Antenna
    • Enable reception of local results

Create Config File

  • Watch the incoming messages from OGN receiver (Status -> Local FLARM Receiver Connection)

Incoming FLARM results

In case of troubles, disable and re-enable the OGN receiver part within Settings -> External Sources Settings -> Local Flarm Receiver Data Reception -> Save

Retrieved from "https://wiki.jetvision.de/index.php?title=Air!Scout:Flarm_Local_Receiver&oldid=3371"