View source for Air!Squitter:OGN Local Receiver for FLARM Reception

====Local FLARM Receiver (Optional)====

[[File:Airscout Rear V2.jpg|450px|Air!Squitter Rear Panel]]

Air!Squitter can optionally be equipped with a RTL-SDR stick, and by that serve some SDR applications. It comes with preinstalled software from the Open Glider Network (see http://wiki.glidernet.org/start). Air!Squitter is able to include the results of this receiver into its own database and show FLARM aircraft together with ADS-B and MLAT data in a common map. However, in order to work correctly, some steps have to be done after installation of the hardware:

* Check that GPS is stable (Status -> GPS)
* Create the configuration file for OGN receiver (Settings -> External Sources Settings -> Create Configuration for Integrated Open Glider Net Receiver)
** Select a location name according to the naming rules
** Enable bias current if you are using Jetvision's Active Diapason Antenna
** Enable reception of local results

[[File:OGN_Config.png|450px|Create Config File]]

* Watch the incoming messages from OGN receiver (Status -> Local FLARM Receiver Connection)
<br>
[[File:OGN_Status.png|450px|Incoming FLARM results]]

In case of troubles, disable and re-enable the OGN receiver part within Settings -> External Sources Settings -> Local FLARM Receiver Data Reception -> Save