Radarcape:Front and Back Panel: Difference between revisions

Latest revision as of 16:33, 7 November 2019

This is a USB type A connector. It is available for memory sticks or user extensions. It is fully supported by the internal Linux system.

The power LED is illuminated green when power is applied to the back side connector.

The Mode-S LED is flashing green on each frame that becomes received from aircraft.

If no frames are received (e.g., no antenna connected), it flashes once per second in order to indicate working state.

The GPS LED is flashing green once each second exactly when the second changes. In case of GPS degradation, it occasionally flashes yellow.

@@ Line 1: / Line 1: @@
-==Radarcape Backside==
+{{#seo:
+|title=Radarcape Front and Back Panal
+|titlemode=replace
+|keywords=radarcape,front,back,panal,led,connectors,description
+|description=Description of the Radarcape connectors and LEDs
+}}
+==Radarcape Front Side==
+[[File:radarcape.jpg|450px|Radarcape front side explained]]
+* USB Extension Slot
+* Power LED
+* Mode-S LED
+* GPS LED
+====USB Extension Slot====
+This is a USB type A connector. It is available for memory sticks or user extensions. It is fully supported by the internal Linux system.
+====Power LED====
+The power LED is illuminated green when power is applied to the back side connector.
+====Mode-S LED====
+The Mode-S LED is flashing green on each frame that becomes received from aircraft.
+If no frames are received (e.g., no antenna connected), it flashes once per second in order to indicate working state.
+====GPS LED====
+The GPS LED is flashing green once each second exactly when the second changes. In case of GPS degradation, it occasionally flashes yellow.
+==Radarcape Back Side==
 [[File:Radarcape-back.png|450px|Radarcape backside explained]]
+* Mode-S antenna (SMA connector)
+* GPS antenna (SMB connector)
+* 100Base-TX Ethernet connector (LAN)
+* USB Gadget for Serial and Network (USB mini-B connector)