Main Page

Welcome to the Wiki of Radarcape and Mode-S Beast

The Radarcape and the Mode-S Beast are the most powerful Mode-S and Mode-A/C receivers and decoders on the spotters market.

While the Mode-S Beast is designed to be used as USB device and requires external decoding software, the Radarcape with its embedded Linux plattform adds own decoding and network connectivity.

This page provides technical support and information about the Radarcape and the Mode-S Beast.

Product Pages

Radarcape	Radarcape	Mode-S Beast
The Radarcape is a standalone device and includes the features of the Mode-S Beast plus many other features: Easy usage There are several ways of displaying the air traffic with nothing more than a web browser, even from multiple locations: Aircraft list 2D Map (OpenLayers as ATCscope, OSM standard) 3D Map (using Google Earth or similar) Multilateration with high accuracy Jetvision MLAT server Multi source map view (ADS-B, MLAT, FLARM) with MLAT server and FLARM option Raw data and interfaces RAW data similar to the Mode-S Beast is available, additionally also pre-checked and pre-filtered Port 30003 data Raw data is available multiple and mixed, from several consumers at the same time, and with all services in parallel. Raw data is timestamped with a GPS synchronized absolute timestamp for high resolution multilateration JSON file stream output (all sources) Low Level Access Several reports of the current air situation are available Own applications and programs can be installed in parallel to the operating software Data Feeding The Radarcape comes with multiple feeder for the FlightRadar24, FlightAware, OpenSky, PlanePlotter network (all switchable) Remember, that all features above are available at the same time and in parallel. The Radarcape connects to your PC via network, as such it is ideal also for remote locations.	The Air!Squitter is a follow-up of the Radarcape with an additional optional built in SDR based Flarm receiver. It is a nice desktop unit and offers WiFi as Client and Access point. In oder to make installation easier, it is designed for our common ADS-B/GPS antenna, so you only need one antenna cable and no separate GPS antenna.	The Mode-S Beast is a simple USB device, like a USB mouse, and includes a receiver and frame decoder. It is completly USB powered. It points with open protocol best of class reception range and sensitivity compatiblity to most of the decoding programs, like for example Planeplotter or ADSB-Scope easy usage small size

General Information

• Information about antennas and filters can be found in the accessories section.
• For questions consult the Beast Forum.
• Conventions used in this Wiki