Radarcape:Specification: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
imported>Beastadmin
No edit summary
imported>Beastadmin
No edit summary
Line 22: Line 22:
==Links==
==Links==


* [http://www.beagleboard.org/Products/BeagleBone| BeagleBoard.org]
* [http://www.beagleboard.org/Products/BeagleBone BeagleBoard.org]
* [http://www.trimble.com/timing/resolution-smt.aspx|Trimble Resolution SMT web page]
* [http://www.trimble.com/timing/resolution-smt.aspx Trimble Resolution SMT web page]

Revision as of 16:22, 19 April 2015

Radarcape

  • The Radarcape consists of:
    • Beaglebone board
    • Radarcape Mode-S/ADS-B receiver
    • GPS module Trimble Resolution SMTx
    • Device case
  • Power Consumption
    • 5 V external supply
    • Standard 5.5 mm/ 2.1 mm DC connector (plus inside, minus outside)
    • Electrical current with GPS (including antenna) typical 720 mA
  • Case
    • Length approximately 92 mm (110 mm with antenna connector)
    • Width approximately 80 mm
    • Height approximately 45 mm
    • Weight approximately 0.233 kg

Linux Distribution

The Radarcape operates an Embedded Linux. We do not guarantee stability with other Linux distributions than the delivered one.

Links