Radarcape:Specification: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
← Older edit
imported>Beastadmin
Nunojpg (talk | contribs)
146 edits
No edit summary
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{#seo:
|title=Radarcape Specification
|titlemode=replace
|keywords=radarcape,specification,hardware,dimensions,weight
|description=Specification of the Radarcape
}}
=Radarcape=
=Radarcape=


* The Radarcape consists of:
* The Radarcape consists of:
** Beaglebone board
** Beaglebone Black SBC computer (earlier version used a Beaglebone White)
** Radarcape Mode-S receiver
** Radarcape Mode-S/ADS-B receiver
** GPS module (optional)
** GPS module Trimble RES SMT 360 (earlier versions used Resolution SMT and Resolution SMTx)
** Device case
* Power Consumption
* Power Consumption
** 5V external supply
** 5 V external supply
** Standard 2.1 mm DC connector (plus inside, minus outside)
** Standard 5.5 mm/ 2.1 mm DC connector (positive inside, negative outside)
** without GPS, operating: typical 620mA
** Electrical current with GPS (including antenna) typical 720 mA
** with GPS (including antenna): typical 720mA
* Dimensions and Weight
* Case
** Length approximately 92 mm (110 mm with antenna connector)
** Length approximately 92 mm (110 mm with antenna connector)
** Width approximately 80 mm
** Width approximately 80 mm
** Height approximately 45 mm
** Height approximately 45 mm
* Weight approximately 0.233 kg
** Weight approximately 0.233 kg
 
 
==Beaglebone Board (Rev. A6A)==
 
* AM335x 720MHz ARM Cortex-A8
* 256MB DDR2 RAM
* 3D graphics accelerator (SGX530)
* 2x PRU 32-bit RISC CPUs
* Connectivity
** USB client (mini B receptacle)
** USB host (type A receptacle)
** 100Base-TX Ethernet
** 2x 46 pin headers (used by Radarcape board)
* microSD card with Angstrom Linux distribution
 
More Information: [http://www.beagleboard.org/Products/BeagleBone www.BeagleBoard.org]
 
==Radarcape Board==
 
* FPGA based Mode-S ADS-B receiver
* SMA Mode-S antenna connector
 
 
==GPS Module==


* Trimble Resolution T GPS module (optional)
==Linux Distribution==
* SMB GPS antenna connector


More Information: [http://www.trimble.com/timing/resolution-t.aspx www.trimble.com]
The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.

Latest revision as of 12:42, 18 November 2019


Radarcape

  • The Radarcape consists of:
    • Beaglebone Black SBC computer (earlier version used a Beaglebone White)
    • Radarcape Mode-S/ADS-B receiver
    • GPS module Trimble RES SMT 360 (earlier versions used Resolution SMT and Resolution SMTx)
    • Device case
  • Power Consumption
    • 5 V external supply
    • Standard 5.5 mm/ 2.1 mm DC connector (positive inside, negative outside)
    • Electrical current with GPS (including antenna) typical 720 mA
  • Dimensions and Weight
    • Length approximately 92 mm (110 mm with antenna connector)
    • Width approximately 80 mm
    • Height approximately 45 mm
    • Weight approximately 0.233 kg

Linux Distribution

The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.

Retrieved from "https://wiki.jetvision.de/index.php?title=Radarcape:Specification&oldid=3472"