Latest revision as of 06:30, 30 September 2026

Radarcape

The Radarcape consists of:
- Beaglebone Black SBC computer (earlier version used a Beaglebone White)
- Radarcape Mode-S/ADS-B receiver
- GPS module Trimble RES SMT 360 (earlier versions used Resolution SMT and Resolution SMTx)
- Device case
Power Consumption
- 5 V external supply
- Standard 5.5 mm/ 2.1 mm DC connector (positive inside, negative outside)
- Electrical current with GPS (including antenna) typical 720 mA
Dimensions and Weight
- Length approximately 92 mm (110 mm with antenna connector)
- Width approximately 80 mm
- Height approximately 45 mm
- Weight approximately 0.233 kg
Temperature Range
- Operation:
  - Regular decice: Extended Commercial: -20°C up to +70°C, non condensing (*1)
  - Extended temperature version: -40°C up to +80°C, non condensing (*1)
    (*1) Proven by experience, not by component selection

The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.

@@ Line 23: / Line 23: @@
 ** Height approximately 45 mm
 ** Weight approximately 0.233 kg
+* Temperature Range
+** Operation:
+***Regular decice: Extended Commercial: -20°C up to +70°C, non condensing (*1)
+***Extended temperature version: -40°C up to +80°C, non condensing (*1)<br><small>(*1) Proven by experience, not by component selection</small>
+** Storage: -40°C up to +80°C, non condensing
 ==Linux Distribution==
 The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.
-==Links==
-* [http://www.beagleboard.org/Products/BeagleBone BeagleBoard.org]