Radarcape:Front and Back Panel: Difference between revisions
imported>Dl4mea |
imported>Dl4mea |
||
| Line 34: | Line 34: | ||
* 100Base-TX Ethernet connector (LAN) | * 100Base-TX Ethernet connector (LAN) | ||
* USB Serial (USB mini-B connector) | * USB Serial (USB mini-B connector) | ||
'''Note:''' If there is no label like <ins>RC65</ins> on the back side of the device (above the Ethernet connector), your hostname (DNS name) is <ins>radarcape</ins>. Otherwise, this sign is telling your hostname. | |||
Revision as of 13:02, 17 November 2013
Radarcape Front Side
- USB Extension Slot
- Power LED
- Mode-S LED
- GPS LED
USB Extension Slot
This is a USB type A connector. It is available for memory sticks or user extensions. It is fully supported by the internal Linux system.
Power LED
The power LED is green when power is applied to the back side connector.
Mode-S LED
The Mode-S LED is flashing red on each frame that becomes received from aircraft.
If no frames are received (e.g. no antenna connected), it flashes once per second in order to indicate working state.
GPS LED
The GPS LED is flashing green once each second exactly when the second changes. In case of GPS degradation, it occassionally flashes red. It is set quite critical, so that may happen during normal operation, too.
Radarcape Back Side
- Mode-S antenna (SMA connector)
- GPS antenna (SMB connector)
- 100Base-TX Ethernet connector (LAN)
- USB Serial (USB mini-B connector)
Note: If there is no label like RC65 on the back side of the device (above the Ethernet connector), your hostname (DNS name) is radarcape. Otherwise, this sign is telling your hostname.