Revision as of 16:32, 7 November 2019

Radarcape

The Radarcape consists of:
- Beaglebone Black SBC computer (earlier version used a Beaglebone White)
- Radarcape Mode-S/ADS-B receiver
- GPS module Trimble RES SMT 360 (earlier versions used Resolution SMT and Resolution SMTx)
- Device case
Power Consumption
- 5 V external supply
- Standard 5.5 mm/ 2.1 mm DC connector (positive inside, negative outside)
- Electrical current with GPS (including antenna) typical 720 mA
Dimensions and Weight
- Length approximately 92 mm (110 mm with antenna connector)
- Width approximately 80 mm
- Height approximately 45 mm
- Weight approximately 0.233 kg

The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.

@@ Line 10: / Line 10: @@
 * The Radarcape consists of:
-** Beaglebone board
+** Beaglebone Black SBC computer (earlier version used a Beaglebone White)
 ** Radarcape Mode-S/ADS-B receiver
-** GPS module Trimble Resolution SMTx
+** GPS module Trimble RES SMT 360 (earlier versions used Resolution SMT and Resolution SMTx)
 ** Device case
 * Power Consumption
 ** 5 V external supply
-** Standard 5.5 mm/ 2.1 mm DC connector (plus inside, minus outside)
+** Standard 5.5 mm/ 2.1 mm DC connector (positive inside, negative outside)
 ** Electrical current with GPS (including antenna) typical 720 mA
 * Dimensions and Weight
@@ Line 26: / Line 26: @@
 ==Linux Distribution==
-The Radarcape operates an Embedded Linux. We do not guarantee stability with other Linux distributions than the delivered one.
+The Radarcape operates an embedded linux distribution. We do not guarantee stability with other Linux distributions than the delivered one.
 ==Links==
 * [http://www.beagleboard.org/Products/BeagleBone BeagleBoard.org]
-* [http://www.trimble.com/timing/resolution-smt.aspx Trimble Resolution SMT web page]