Radarcape

The Radarcape consists of:
- Beaglebone board
- Radarcape Mode-S/ADS-B receiver
- GPS module Trimble Resolution SMTx
- Device case
Power Consumption
- 5 V external supply
- Standard 5.5 mm/ 2.1 mm DC connector (plus inside, minus outside)
- Electrical current with GPS (including antenna) typical 720 mA
Case
- Length approximately 92 mm (110 mm with antenna connector)
- Width approximately 80 mm
- Height approximately 45 mm
- Weight approximately 0.233 kg

Linux Distribution

The Radarcape operates an Embedded Linux. We do not guarantee stability with other Linux distributions than the delivered one.